Editor's Note: Upgrading the hard drive can be one of the best things you can do for your Mac. But it's also one of the hardest to explain: each Mac model is different, and the upgrade instructions for one probably won't apply to another. We've done a couple of our own hard-drive upgrade guides (for the Mac mini, the MacBook Pro, and the MacBook Air). In the course of writing those stories, we found iFixit.com's comprehensive collection of step-by-step instructions for upgrading hard drives invaluable. We thought you might find them just as useful. So we asked iFixit's Kyle Wiens to quickly summarize the process of upgrading all of Apple's recent Mac models and to provide links to iFixit's instructions for each one.
PT800CE-A7 Driver Primary Bus Master IDE Controller (dual fifo) Driver Secondary Bus Master IDE Controller (dual fifo) Driver VIA Bus Master PCI IDE Controller Driver. Does the BKi V1. Card reader support on Pt800ce-a motherboard Lite. Why does the system hang after all the drivers are installed? Recovery CD Audio driver lost.
Pt800ce-a sata driver Pt800ce-a sata driver Are you looking driver for a Elitegroup PT800CE-A V1. Bottom line here, I believe you HAVE to either have the SATA drivers on a floppy, OR use an IDE drive pt800ce-a sata driver set things up first. https://luckypowerup.weebly.com/previous-versions-of-teamviewer-for-mac.html. It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Testing Stability Pt800ce-a sata highly effective stress test is the “Torture Test” feature in the Prime95 program. I pt800ce-a sata tried to install Windowsand I.
If you’ve had your Mac for a while, chances are you’re running out of drive space. If you’re still happy with that old machine’s performance, there’s no need to get a whole new Mac just to get more storage room: In many cases, it makes way more sense just to upgrade the hard drive. It’s a cost-effective fix: Drive prices have dropped recently, so you can get plenty of gigabytes for your bucks.
But before you crack the hood and start mucking about, pause for a moment to consider the project ahead of you. On some Macs it’s easy to install a new hard drive; on others, it isn’t.
To find out how hard it'd be to upgrade your Mac, look it up in the guide below. You'll find out how difficult the upgrade is, what kind of drive that Mac uses, and a link to iFixit’s guide to replacing its drive. If you click on a model name in the table, you'll be sent to the iFixit guide for it; if there’s no link, we don't have a guide (yet). If you’re not sure which Mac model you have, see iFixit’s Mac identification system.
iMacs
The early G5 iMacs are super easy to open up. Once you loosen three screws, the rear panel lifts off, giving you direct access to the hard drive. It’s simple and straightforward. Rating: Easy.
iMacs (early G5) | Drive type |
---|---|
iMac G5 17-inch Model A1058 | 3.5-inch SATA |
iMac G5 20-inch Model A1076 | 3.5-inch SATA |
The later G5 iMacs and first Intel models are tough: They have nasty retaining clips holding the front bezel in place. Removing the bezel requires a flat pry tool, such as a credit card or ID badge. You also need to completely remove the LCD display and lower EMI shield before you can access the drive. Rating: Difficult
iMacs (later G5s, early Intel) | Drive type |
---|---|
iMac G5 17-inch Model A1144 | 3.5-inch SATA |
iMac G5 20-inch Model A1145 | 3.5-inch SATA |
iMac Intel 17-inch | 3.5-inch SATA |
iMac Intel 20-inch EMC 2105 and 2118 | 3.5-inch SATA |
iMac Intel 24-inch EMC 2111 | 3.5-inch SATA |
Replacing the hard drive in the more recent iMac models requires a bit of finesse and some special equipment, but otherwise isn’t that bad. You’ll need to use two suction cups to take off the front glass panel. Once the glass is removed, you will also have to remove the front bezel and LCD before being able to access the hard drive. Rating: Moderate https://renewheat108.weebly.com/conceptdraw-pro-9-mac-download.html.
Recent iMacs | Drive type |
---|---|
iMac Intel 20-inch EMC 2133 and 2210 | 3.5-inch SATA |
iMac Intel 20-inch EMC 2266 | 3.5-inch SATA |
iMac Intel 24-inch EMC 2134 and 2211 | 3.5-inch SATA |
iMac Intel 24-inch EMC 2267 | 3.5-inch SATA |
iMac Intel 21.5-inch | 3.5-inch SATA (a) |
iMac Intel 27-inch | 3.5-inch SATA (a) |
(a) with a custom hard drive sensor Intel c600 x79 series chipset driver for mac.
Update Drivers For Mac
Mac mini
As with the iMacs, opening the Mac mini is the trickiest part of upgrade: You need to insert a sharpened putty knife (you can either buy a sharpened one from iFixit or sharpen one yourself) between the upper and lower cases to separate them. Matshita dvd rom driver for macbook pro. Once you open the case, removing the internal frame and accessing the hard drive is relatively straightforward. Rating: Moderate
Mac mini | Drive type |
---|---|
Mac mini (PowerPC) | 2.5-inch 9.5mm ATA |
Mac mini Model A1176 | 2.5-inch 9.5mm SATA |
Mac mini Model A1283 | 2.5-inch 9.5mm SATA |
MacBook Pros
The early MacBook Pros can be complicated to take apart: You need to remove the upper case, which requires removing a number of small screws. But once that’s done, removing the hard drive is as simple as disconnecting a couple of cables and removing a few more screws. Rating: Moderate
Early MacBook Pros | Drive type |
---|---|
MacBook Pro 15-inch Model A1150 | 2.5-inch 9.5mm SATA |
MacBook Pro 15-inch Core 2 Duo Model A1211 | 2.5-inch 9.5mm SATA |
MacBook Pro 15-inch Core 2 Duo Models A1226, A1260 | 2.5-inch 9.5mm SATA |
MacBook Pro 17-inch Model A1151 | 2.5-inch 9.5mm SATA |
MacBook Pro 17-inch Core 2 Duo | 2.5-inch 9.5mm SATA |
The unibody MacBook Pros all provide simple access: You remove the bottom cover and disconnect the battery, and the hard drive is right there. Rating: Easy
Unibody MacBook Pros | Drive type |
---|---|
MacBook Pro 13-inch Unibody | 2.5-inch 9.5mm SATA |
MacBook Pro 15-inch Unibody Late 2008, Early 2009 | 2.5-inch 9.5mm SATA |
MacBook Pro 15-inch Unibody 2.53 GHz Mid 2009 | 2.5-inch 9.5mm SATA |
MacBook Pro 15-inch Unibody Mid 2009 | 2.5-inch 9.5mm SATA |
MacBook Pro 17-inch Unibody | 2.5-inch 9.5mm SATA |
MacBooks
Apple engineers were quite clever and conveniently hid the hard drives on the MacBook Core Duo and Core 2 Duo behind the memory access door. Thankfully, that door is easy to get to and to remove once you take out the battery. And once the door is gone, you just pull out the drive. Only word of caution: Be careful to slide the new drive into the rubber slot in the same orientation as the original drive. Rating: Easy
Core Duo, Core 2 Duo MacBooks | Drive type |
---|---|
MacBook Core Duo | 2.5-inch 9.5mm SATA |
MacBook Core 2 Duo | 2.5-inch 9.5mm SATA |
Apple made accessing the hard drive on the first unibody MacBook (model A1278) easy. The hard drive is hidden underneath the battery access door. Flip that door’s tab, remove the cover, remove the battery, and the hard drive is ready to be plucked. The updated unibody MacBook has a slightly different opening procedure, but its hard drive is just as easy to replace: Just remove the bottom cover. Rating: Easy
Unibody MacBooks | Drive type |
---|---|
MacBook Unibody Model A1278 | 2.5-inch 9.5mm SATA |
MacBook Unibody Model A1342 | 2.5-inch 9.5mm SATA |
![For For](/uploads/1/3/3/8/133812098/545532046.jpg)
MacBook Air
Sata Driver For Xp Install
It’s a bit harder to get to the MacBook Air’s hard drive than the regular MacBook’s. Antares auto tune arm implant real. You need to remove the bottom cover as well as the battery, both of which are held by a variety of screws. It’s still not terribly difficult. Rating: Moderate
MacBook Air | Drive type |
---|---|
MacBook Air | Varies (a) |
(a) the original Air uses a 1.8-inch 5mm ZIF PATA, and the second and third revisions have a 1.8-inch 5mm ZIF SATA
Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read our affiliate link policy for more details.
Installing up to four internal hard drives in a Mac Pro is an easy do-it-yourself project that almost anyone can feel comfortable tackling. Download tftp server for mac.
Even an easy project goes better with a little advance planning, though. You can make the installation go quickly and smoothly by preparing your work area ahead of time.
of 03
Gather Supplies and Get Started
- One or more hard drives. The drive(s) should conform to either SATA 1, SATA 2 or SATA 3 specifications. SATA is a very common type of hard drive, so it should be easy to locate and purchase one, either locally or online.
- A screwdriver, preferably a Phillips #1, although in a pinch, a #2 will also work.
- A clean work area. You will be working with a number of small screws; don't risk losing any of them in a mish-mash of clutter.
Let's Get Started
Good lighting and comfortable access make almost any task go more smoothly. If you're like many Mac Pro owners, your Mac Pro is probably under a desk or table. The first step is to move the Mac Pro to a clean table or desk in a well-lit area.
Wacom Drivers For Mac
Discharge Static Electricity
- If the Mac Pro is running, shut it down before proceeding.
- Disconnect any cables that are connected to the Mac Pro, except the power cord. The power cord must be connected, so you can discharge any static buildup through the power cord and into its grounded outlet.
- Discharge any static electricity that has built up on your body by touching the PCI expansion slot cover plates. You'll find these metal plates on the back of the Mac Pro, next to the DVI video connectors for the display. You may feel a slight static shock when you touch the metal cover plates. This is normal; there's no need to be concerned for yourself or the Mac Pro.
- Remove the power cord from the Mac Pro.
of 03
Open the Mac Pro Case and Remove the Hard Drive Sled
The easiest way to access the Mac Pro's inner workings is to position it so that the side of the case that has an Apple logo on it is facing you.
If you have an adjustable lamp or light fixture, position it so that its light shines on the inside of the Mac Pro.
Open the Case
- Lift the access latch on the back of the Mac Pro.
- Tilt the access panel down. Sometimes the panel will stay in an upright position, even with the access latch open. If this happens, grab the sides of the access panel and gently tilt it down.
- Once the access panel is open, put it on a towel or other soft surface, to prevent its metal finish from getting scratched.
According to Apple, it's safe to lay the Mac Pro on its side, so that the case's opening is facing straight up, but I've never found a good reason (or need) to do this. I recommend leaving the Mac Pro standing upright. This puts the hard drive area of the case more or less at eye level. The only disadvantage is that you'll need to hold onto the case when you remove or insert the hard drive sleds, to ensure that the Mac Pro doesn't fall over.
You can use whichever method feels most comfortable for you. All images in this guide will show the Mac Pro standing up.
Remove the Hard Drive Sled
- Ensure that the access latch on the back of the Mac Pro is in the up position. The access latch not only locks the access panel, it also locks the hard drive sleds in place. If the latch isn't up, you won't be able to insert or remove a hard drive sled.
- Pick the hard drive sled you want to use. The sleds are numbered one through four, with the number one sled near the front of the Mac Pro, and the number four sled at the rear. There is no significance to the positions or numbers, except that Apple uses the number one sled as the default location for a hard drive installation.
- Pull the hard drive sled out of the drive bay. This might seem tricky the first time you do it. Just let your fingers curl around the bottom of the sled, and then pull it towards you.
of 03
Attach the Sled to the Hard Drive
If you're replacing an existing hard drive, remove the old hard drive from the sled you removed in the previous step before proceeding. Steam key generator activation key.
Attach the Hard Drive
Sata Driver For Mac
- Remove the four screws attached to the hard drive sled and set them aside.
- Place the new hard drive on a flat surface, such as your nice, clean table, with the printed circuit board facing up.
- Put the hard drive sled on top of the new hard drive, aligning the sled's screw holes with the threaded mounting points on the drive.
- Use the Phillips screwdriver to install and tighten the mounting screws you set aside earlier. Be careful not to over-tighten the screws.
Sata Driver Disk
Reinstalling the Sled
Putting the sled back where it came from is a simple process. First, as you did when you removed the sled, make sure the access latch on the back of the Mac Pro is in the up position.
Slide the Sled Home
- Now that the new hard drive is attached to the sled, align the sled with the drive bay opening and gently push the sled into place, so that it's flush with the other sleds.
- To reinstall the access panel, put the bottom of the panel into the Mac Pro, so that the set of tabs on the bottom of the panel catch the lip at the bottom of the Mac Pro. Once everything is aligned, tilt the panel up and into position.
- Close the access latch on the back of the Mac Pro. This will lock the hard drive sleds in place, as well as lock the access panel.
Driver23275.zip
That's all there is to it, other than to reconnect the power cord and all the cables you disconnected back at the beginning of this project. Once everything is connected, you can turn your Mac Pro on.
You will probably need to format the new hard drive before you can use it. You can do this with the Disk Utilities application, which is located in the Applications/Utilities folder. If you need help with the formatting process, check out our Disk Utilities guide.